APPLICATION Fleet service

Alarm Tech Supervisor
The Alarm tech Supervisor uses float switches to measure the level of waste oil or waste antifreeze. Auto shut-off at high level conditions.
Part No.:
381 400 Single Bung Single Float Sensor
381 401 Single Bung Two Float sensor
Market Served:

IMC Console
Samson’s IMC System is the universal replacement console for all dispense consoles.
Part No.:
381 193 2 product-2 dispense point for stand alone use
381 194 1 product-1 dispense point with PC interface, software & USB cable
381 195 2 product-2 dispense point with PC interface, software & USB cable
381 190 IMC Counsel for stand alone use
381 191 PC interface, software & USB cable
Market Served:

AMS President Keypads Quarts
Samson’s AMS System is the leading wired system for installation from small garages to large factories dispensing windshield wash solution, antifreeze, diesel, motor oil, ATF and DEF. One President Keypad is required per system.
Part No.:
381 004 President Keypad Qts AMM Chip no printer
381 003 President Keypad Qts with AMM Chip ticket printer, PC Interface, AMS-PC software
381 005 President Keypad Qts AMM Chip no ticket printer, PC Interface, AMS-PC software
Market Served:

Tankroom Manager
The Tank Room Manager directly measures the liquid level on dispensing products with a barometric probe. May be used with and liquid with known density.
Part No.:
381 157 Tank Room Manager Stand Alone (up to four tanks)
381 405 Tank Probe - Order one per tank
Market Served:

Premium Heavy Duty Portable Packages
Choose from air operated or electric diaphragm pumps portable packages for 55 gal, wall mount, and tote top units.
Fluids Handled
Part No.:
555 111 Heavy Duty electric diaphragm pumps portable packages for 55 gal unit
Market Served:

Pneumatic Premium Heavy Duty Stationary Packages
Choose from air operaed or electric diaphragm pumps portable packages for 55 gal, wall mount, and tote top units.
Fluids Handled
Part No.:
555 367 Pneumatic diaphragm pumps stationary package
Market Served:

Electric Premium Heavy Duty Stationary Packages
Choose from air operaed or electric diaphragm pumps portable packages for 55 gal, wall mount, and tote top units.
Fluids Handled
Part No.:
555 113 Electric pumps stationary package
Market Served:

Lever Action Pump Kits
All Polypropylene construction with EPDM Seals for DEF barrel dispensing.
Fluids Handled
Part No.:
300 601 Level Pump with Dispense Hose, Handle & Meter
Market Served:

Standard Duty Pneumatic Pump Kits Non-Metered
Pneumatic kit comes complete, without meters, ready to assemble.
Fluids Handled
Part No.:
560 303A Pneumatic Pump Kits Automatic Handle
Market Served:

Standard Duty Pneumatic Pump Kits-Metered
Pneumatic kit comes complete, with meters, ready to assemble.
Fluids Handled
Part No.:
560 304A Pneumatic Pump Kits Automatic Handle & Meter
Market Served:

Standard Duty Solura Pump Kits-Non-Metered
Electric Pump kit comes complete, without meters, ready to assemble.
Fluids Handled
Part No.:
560 303E Electric Pump Kits Automatic Handle-Non Metered
Market Served:

Standard Duty Solura Pump Kits-Metered
Electric Pump kit comes complete, with meters, ready to assemble.
Fluids Handled
Part No.:
560 304E Electric Pump Kits Automatic Handle-Meter
Market Served:

Brass Pump Oilers
Brass pump oilers with steel can.
Part No.:
2309 1/2 pint steel can & flex spout
2311 1 pint steel can & rigid spout
2310 1 pint steel can & flex spout
2312 1 1/2 pint steel can & rigid spout
2313 1 1/2 pint steel can & flex spout
2315 1 quart steel can & rigid spout
2314 1 quart steel can & flex spout
Market Served:

HD High Pressure Machine Oiler
1 Pint HD high pressure, cast iron pump with filter screen and rigid spout
Part No.:
Market Served:

Plastic Funnels & Measures
Heavy duty plastic funnels, measures, and spouts.
Part No.:
2352 Large Funnel-regular filter
2353 Large Funnel-diesel filter
2377 Measure 5 qt w/flex spout
2318 Spout-rigid for funnel 2351 & measure 2377
2319 Spout -flex for funnel 2351 & measure 2377
Market Served:

Lift Action Pumps
Lift action pumps for chemical products, PTFE Seals
Part No.:
300 400 Lift Action Pumps for Chemical Products 5 gal and 16 gal drum
300 500 Lift Action Pumps for Chemical Products 5 gal and 16 gal drum/Nylon/PTFE
300 501 Lift Action Pumps for Chemical Products 55 gal/Nylon/PTFE
Market Served:

Plastic Lever Pumps
Plastic lever pumps-polypropylene
Part No.:
3007 Lever Pump-Viton Seals for Chemicals
3009 Lever Pump-NBR Seals for lubricants
Market Served:

Siphon Transfer Pumps
Siphon transfer pumps 2 gal/min for antifreeze, light mineral oils, diesel, detergent, and automotive & light petroleum fluids.
Part No.:
Market Served:

Nylon Barrel Pump
Nylon barrel pump for use with strong chemicals. 16 gal Keg & 55 gal drum.
Part No.:
Market Served:

Chemical Hand Pump
Chemical hand pump made of 316 stainless steel and PTFE seals. 16 gal Keg & 55 gal drum.
Part No.:
Market Served:

Drum Pump-High Performance
High performance drum pump for use with all types and viscosities of lubricants. 16 gal Keg & 55 gal drum.
Part No.:
Market Served:

Drum Pump-for Fluids
Lever action drum pump for use with light viscosity and non-corrosive lubricants. 16 gal Keg & 55 gal drum.
Part No.:
Market Served:

Drum Pump-Lever Action
Lever action drum pump for use with alcohols, detergents, solvents, oils and antifreeze. 16 gal Keg & 55 gal drum.
Part No.:
Market Served:

Drum Pump-Rotary
Rotary Action Drum Pump 16 & 55 gal Drums
Part No.:
1245 Rotary Pump-Cast Iron/Steel for fuel oils, kerosene, diesel fuel, oils and light fluids.
Market Served:

Drum Pump-Lever Action-Medium Pressure
Lever action transfer pump for use with light viscosity lubricants. 5 gal pail, 16 gal Keg & 55 gal drum.
Part No.:
306 200 Lever action transfer pump 5 gal pail & 16 gal kegs
306 100 Lever action transfer pump 16 gal kegs
306 400 Lever action transfer pump 55 gal drum
Market Served:

Pressurized Dispensers
Portable pressurized lube dispensers units for gear oil and other fluids. 6 1/2″ Gal tank.
Part No.:
1322 Portable Pressurized Lube Dispenser Non-metered Metered
Market Served:

Gear Oil Dispenser
Heavy duty hand operated gear lube pump.
Part No.:
Market Served:

Grease Gun Filler Pumps
Heavy duty hand operated filler pump unit with pump, cover, filler valve, dust cap, follower plate.
Part No.:
1989 Heavy Duty Hand Operated Filler Pump 120 lb keg
Market Served:

Bearing Packer
Heavy duty hand operated bearing packer with pump, cover, packer, dust cap, follower plate.
Part No.:
1992 Heavy Duty Hand Operated Bearing Packer 120 lb Keg
Market Served:

Filler Pumps for Centeralized Greasing Units
Heavy duty hand operated filler pump unit for filling the reservoir of a centeralized greasing system. with pump, cover, 5′ hose, 2-1/4″ hydraulic connector.
Part No.:
108 503 Heavy Duty Hand Operated Centralized Filler Pump 120 lb keg
Market Served:

Adaptor
Combinations, Swivels, and flex
Part No.:
1266 Threaded Swivel Adapter 1/8" NPTF
1270 Rigid flex adapter with hydraulic coupler 1/8" NPTF
Market Served:

Whip Hoses
Grease Whip Hoses, 3,000 psi, 1/8″ NPTM
Part No.:
1262 Whip Hose 18"
1264 Whip Hose 24"
1229 Whip Hose 18" with Giant Buttonhead Coupler
1249 Whip Hose 18" with Giant Buttonhead Coupler and Lock Sleeve
1259 Whip Hose 12" with 4 Jaw Narrow Sleeve
1269 Whip Hose 12" with 4 Jaw Narrow Sleeve and Lock Sleeve
Market Served:

Grease Outlets-Hand Operated Equipment
Part No.:
1202 Curved Outlet Pipe 6" with 4 Jaw Coupler
1203 Straight Outlet Pipe 6"
1204 Straight Outlet Pipe 6" with 4 Jaw Coupler
1211 Curved Outlet Pipe 6" with 360° Adjustable Locking Inlet Nut and 4 Jaw Coupler
1224 4 Jaw Coupler 1/8" NPTF
Market Served:

Grease Outlets-Air Operated Equipment
Grease Outlet, Angled Rigid, 1/8″ NPT
Part No.:
1120 Angled Rigid Outlet 1/8" NPTM
1124 High Pressure Coupler 3 Jaw
121 000 High Pressure Narrow Coupler 3 Jaw
Market Served:

Portable Hand Operated Lube Pumps
Designed for 16 gal open top drums for gear lube and ATF Fluid
Part No.:
1021 Hand Operated Lube Pumps Metered
Market Served:

Buttonhead Coupler
Buttonhead Coupler 1/8″ MPTF
Part No.:
1228 Buttonhead Coupler Giant 1/8" MPTF
Market Served:

Seal-off Adaptor
Rubber tip seal-off adapter 1/8″ NPTF
Part No.:
1267 Rubber tip seal-off adapter with lock sleeve 1/8" NPTF
Market Served:

Needlenose Adaptor
Needlenose 1/8″ NPTF
Part No.:
1254 Needlenose Adapter with Lock Sleeve 1/8" NPTF
1250 Injector Needle Adapter
Market Served:

Lock Sleeve Adaptor
Lock Sleeve Adapter 1/8″ NPT
Part No.:
1257 Lock Sleeve 1/8" NPTF
Market Served:

Clamp-Hand Lever
Clamp Type-Hand Lever Grease Gun Holder
Part No.:
Market Served:

Grease Bucket Pump
Bucket pumps include a 35 lb. leak proof, all steel oval shaped bucket with carrying handle and foot rest for easy handling and stability.
Part No.:
1995 3.6 Gal Oil Bucket for High Viscosity Lubricants
Market Served:

Pedal Action Grease Pump
Pedal action grease pump for heavier greases.
Part No.:
Market Served:

High Pressure Grease Pump
Heavy duty hand Operated Grease Pump comes with pump, cover, 5′ hose, pipe coupler, and follower plate.
Part No.:
1994 Heavy Duty Hand Operated Grease Pump 120 lb. keg
Market Served:

Filler Fitting
Filler Fitting 1/8″ NPTM
Part No.:
1213 Filler Fitting Standard 1/8" NPTM
Market Served:

Air Bleeder Valve
Air Bleeder Valve 1/8″ NPTM
Part No.:
Market Served:

1/8″ Straight Fitting
Grease Fitting 1/8″ Pipe Thread
Part No.:
679 1/8" Pipe Thread-Long-Straight
Market Served:

1/8″ Angle Fitting
Grease Fitting 1/8″ Pipe Thread
Part No.:
672 1/8" Pipe Thread-65° Angle Short
673 1/8" Pipe Thread-90° Angle
675 1/8" Pipe Thread-65° Angle Long
678 1/8" Pipe Thread-45° Angle
Market Served:

Drive Type Fitting
Drive Type Fitting Straight
Part No.:
666 3/16" Drive Type-Straight
668 5/16" Drive Type-Straight
Market Served:

Buttonhead Fitting
Buttonhead Fitting
Part No.:
1291 Standard 1/4" MPT
1292 Giant 1/4" MPT
1293 Giant 1/4" MPT
Market Served:

Grease Fitting Packages
Grease Fitting Variety Packages
Part No.:
650 200 Grease Fitting Package: 26 pcs 691 / 12 pcs 694 / 12 pcs 697 / 26 pcs 692 / 12 pcs 695 / 12 pcs 698
650 300 Grease Fitting Package: 30 pcs 651 / 12 pcs 657 / 30 pcs 674 / 12 pcs 687 / 12 pcs 673 / 12 pcs 688 / 12 pcs 691 / 12 pcs 694 / 12 pcs 695
Market Served:

1.0 Straight-Metric Fitting
Grease Fitting Tapered Thread-Metric
Part No.:
692 8 mm x 1.0-Straight
Market Served:

1.0 Straight-Metric Fitting – Quantity Packages
Grease Fitting Tapered Thread-Metric Quantity Package
Part No.:
692 020 8 mm x 1.0-Straight 20 pc bag
692 050 8 mm x 1.0-Straight 50 pc bag
692 100 8 mm x 1.0-Straight 100 pc bag
692 011 8 mm x 1.0-Straight 10 pc Clamshell
692 021 8 mm x 1.0-Straight 20 pc Clamshell
692 500 8 mm x 1.0-Straight 500 pc Box
Market Served:

1.0 Angle-Metric Fitting
Grease Fitting Tapered Thread-Metric
Part No.:
695 8 mm x 1.0-Straight-45° Angle
697 6 mm x 1.0-Straight-90° Angle
698 8 mm x 1.0-Straight-90° Angle
Market Served:

1/4″ Straight Fitting
Grease Fitting 1/4″ Pipe Thread
Part No.:
Market Served:

1/4″ Angle Fitting
Grease Fitting 1/4″ Pipe Thread
Part No.:
Market Served:

Professional Gun Series
Air operated Grease Gun 60:1 pressure, 14 oz. cartridges
Part No.:
Market Served:

Special Industrial Series
Air operated Grease Gun 60:1 pressure, 33 1/2 oz. cartridges
Part No.:
Market Served:

Battery Operated Grease Gun
Battery Operated Grease Gun in Carry Case
Part No.:
160 101 Battery Operated Grease Gun Li-ION battery.
Market Served:

1/4″ – 28 Taper Straight Fitting
Grease Fitting Tapered Thread
Part No.:
652 1/4" - 28 Taper Thread-Med-Straight
653 1/4" - 28 Taper Thread-Long-Straight
Market Served:

1/4″ – 28 Taper Angle Fitting
Grease Fitting Tapered Thread
Part No.:
657 1/4" - 28 Taper Thread-45° Angle
Market Served:

14 & 16 Oz Grease Guns
Universal grease guns to be used with 14 oz. grease cartridges or with bulk grease.
Part No.:
1205 Heavy Duty Gun with Rigid Outlet
1206 Heavy Duty Gun with Rigid Outlet with Flex Hose Outlet
1210 Professional Series Gun with Rigid Outlet
1212 Professional Series Gun with 360° Outlet
Market Served:

Deluxe Pistol Grip
Heavy Duty High Pressure Cast Iron
Part No.:
1221 Heavy Duty High Pressure Cast Iron with Flex hose
Market Served:

Professional Pistol Grip
Heavy Duty High Pressure Cast Iron with Removable Valve Checks
Part No.:
1227 Heavy Duty High Pressure Cast Iron with Flex Hose and Removable Valve Checks
Market Served:

Professional Suction Pump
Professional Suction Pump with Flex Hose
Part No.:
Market Served:

Standard Gun
Single Shot non-reciprocating 40:1 air motor
Part No.:
Market Served:

Oil Suction Unit, 6 Gal
Oil Suction Unit 6 Gal. This is a pressure discharge unit, discharged through a 5′ hose pressurizing the unit reservoir.
Fluids Handled
Part No.:
Market Served:

EvacMaster Mount Unit
Single point waste oil suction unit for collecting waste oil directly from the vehicle engine using a suction wand.
Fluids Handled
Part No.:
379 711 Wall mounted waste oil suction unit
Market Served:

EvacMaster Portable Unit
Single point waste oil suction unit for collecting waste oil directly from the vehicle engine using a suction wand.
Fluids Handled
Part No.:
379 707 EvacMaster Portable Unit
Market Served:

Oil Suction Unit, 27 Gal
Oil Suction Unit 27 Gal. This is a pressure discharge unit, discharged through a 5′ hose pressurizing the unit reservoir.
Fluids Handled
Part No.:
Market Served:

Oil Suction Unit with 10 qt Chamber, 27 Gal
Oil Suction Unit 27 Gal. Features a 10 quat transparent chamber. This is a pressure discharge unit, discharged through a 5′ hose pressurizing the unit reservoir.
Fluids Handled
Part No.:
Market Served:

Combined Oil Suction & Gravity Unit, 18 Gal
Combined Oil Suction & Gravity Unit 18 Gal. This is a pressure discharge unit, discharged through a 5′ hose pressurizing the unit reservoir.
Fluids Handled
Part No.:
Market Served:

Combined Oil Suction & Gravity Unit with 10 qt Chamber, 18 Gal
Oil Suction Unit 18 Gal. Features a 10 quat transparent chamber. This is a pressure discharge unit, discharged through a 5′ hose pressurizing the unit reservoir.
Fluids Handled
Part No.:
Market Served:

Oil Suction Unit, 18 Gal
Oil Suction Unit 18 Gal. This is a pressure discharge unit, discharged through a 5′ hose pressurizing the unit reservoir.
Fluids Handled
Part No.:
Market Served:

Heavy Duty Pedestal Drain
Pedestal drain for use in small shops. 5 Gal
Fluids Handled
Part No.:
Market Served:

Under Vehicle Drain
Under vehicle drain for use in small shops. 7 Gal
Fluids Handled
Part No.:
Market Served:

Oil Drain 16 Gal Keg
Oil drain 16 Gal Kegs come with and without Kegs, features a 17″ steel drain bowl and a 4 wheel band dolly for mobility.
Fluids Handled
Part No.:
135 101 Oil Drain for 16 Gal Kegs - Keg included
135 103 Oil Drain for 16 Gal Kegs - with top mount suction kit, keg not included
135 104 Oil Drain for 16 Gal Kegs - with top mount suction kit, keg included
Market Served:

Combined Oil Suction & Gravity Unit, 27 Gal
Combined Oil Suction & Gravity Unit 27 Gal. This is a pressure discharge unit, discharged through a 5′ hose pressurizing the unit reservoir.
Fluids Handled
Part No.:
Market Served:

Combined Oil Suction & Gravity Unit with 10 qt Chamber, 27 Gal
Combined Oil Suction & Gravity Unit 27 Gal. Features a 10 quat transparent chamber. This is a pressure discharge unit, discharged through a 5′ hose pressurizing the unit reservoir.
Fluids Handled
Part No.:
Market Served:

Gravity Collection with Pressure Discharge
Mobile waste drains are used for gravity or suction collection of motor oil, gear oil, or non-aggressive fluids. Gravity drains feature a telescopic bowl for use under vehicle lifts or in pits for the collection of used fluids. Pressure discharge units are discharged through a 5′ hose pressurizing the unit reservoir.
Fluids Handled
Part No.:
3734 Pressure Discharge - Gravity Waste Oil Drainer 18 gal
Market Served:

Gravity Collection with Remote Pump Discharge
Mobile waste drains are used for gravity or suction collection of motor oil, gear oil, or non-aggressive fluids. Gravity drains feature a telescopic bowl for use under vehicle lifts or in pits for the collection of used fluids. Remote pump discharge units are discharged by connecting the unit to a wall mount discharge pump.
Fluids Handled
Part No.:
3733 Remote Pump Discharge - Gravity Waste Oil Drainer 18 gal
Market Served:

Low Boy Mobile Drainer
Traditional oil waste drains are used for designed for use when a service pit or lift is not available or in hard to reach areas. Remote pump discharge units are discharged by connecting the unit to a wall mount discharge pump.
Fluids Handled
Part No.:
Market Served:

Rolling Pit Drain
Rolling pit drain is designed for use in a service pit and features anti-splash screen and adjustable wheels. Order Hook-up Kit 1356 to install a remote pump discharge unit.
Fluids Handled
Part No.:
Market Served:

Low Profile Pressurized Oil Drain
Low profile pressurized drain is designed for use in hard to reach areas.
Fluids Handled
Part No.:
Market Served:

Digital In-line Meter Aluminum 21 GPM
Oval gear meters may be wall mounted in the fluid line, at the pump, or on a bare control handle.
Part No.:
Market Served:

In-Line Meters Mechanical
Mechanical meters designed for dependability.
Part No.:
366 801 Mechanical In-line meter Liter
Market Served:

In-Line Meters Grease
High Pressure oval gear meters for measured dispense of grease.
Fluids Handled
Part No.:
Market Served:

Oil Bars
Oil bars for dispensing bulk lubricants featuring removable catch pan and spring loaded non-drip dispense valve
Part No.:
OB-2 Two Product Dispense
OB-3 Three Product Dispense
OB-4 Four Product Dispense
Market Served:

High Pressure Grease Dispense Valve
High Pressure grease dispense handle with ergonomic body and trigger designed to reduce fatigue.
Fluids Handled
Part No.:
413 080 Grease Control Handle, 3-Jaw Coupler, Rigid Outlet
413 081 Grease Control Handle, 3-Jaw Coupler, 18" Steel Braided Hose
413 082 Grease Control Handle, 3-Jaw Coupler, 18" Steel Braided Hose, Z-Swivel
Market Served:

High Pressure Grease Electronic Dispense Valve
High Pressure metered grease dispense handle with ergonomic body and trigger designed to reduce fatigue.
Fluids Handled
Part No.:
Market Served:

Digital In-line Meter 8 GPM
Oval gear meters may be wall mounted in the fluid line, at the pump, or on a bare control handle.
Part No.:
Market Served:

Digital In-line Meter PVC 13 GPM
Oval gear meters may be wall mounted in the fluid line, at the pump, or on a bare control handle.
Part No.:
Market Served:

MC8 Series Mechanical Dispense Valve
Samson mechanical metered control valves are used at the end of the hose assembly for measured dispensing of lubricants and anitfreeze solutions in tough, intensive use applications.
Part No.:
365 806 MC8 Formable 4-16 Qts 1/4 Turn Tip-Lubricants
365 802 MC8 60° Rigid 4-16 Qts 1/4 Turn Tip-Lubricants
365 826 MC8 Flexible 4-16 Qts 1/4 Turn Tip-Lubricants-Antifreeze
365 803 MC8 Flexible 0-10 Ltrs Auto Tip-Lubricants
365 804 MC8 Formable 0-10 Ltrs 1/4 Turn Tip-Lubricants
365 801 MC8 60° Rigid 0-10 Ltrs 1/4 Turn Tip-Lubricants
365 824 MC8 FFormable 0-10 Ltrs 1/4 Turn Tip-Antifreeze
Market Served:

MC8P Series Mechanical Preset Dispense Valve
Samson mechanical preset metered control valves allow filling crankcases, engines and other lubricants reservoirs.
Part No.:
365 813 MC8P Rigid Gals Dial No-drip Tip
365 811 MC8P Rigid Liters Dial No-drip Tip
Market Served:

Control Valve for Waterbased Fluids
Samson control valves are used at the end of the hose assembly to dispense waterbased fluids and lubricants.
Part No.:
Market Served:

Digital Control Valve for Waterbased Fluids
Samson control valves are used at the end of the hose assembly to dispense waterbased fluids and lubricants.
Part No.:
Market Served:

Electronic Preset Meter
Samson control valves are used at the end of the hose assembly to dispense water-based fluids and lubricants.
Part No.:
2199SF Electronic Control Valve Rigid 60° Auto No-drip Tip-Antifreeze
Market Served:

Oval Gear Electronic Preset Meter
Samson control valves are used at the end of the hose assembly to dispense waterbased fluids and lubricants.
Part No.:
Market Served:

CV11 Series Dispense Valve
Samson control valves are used at the end of the hose assembly to dispense lubricants and antifreeze solutions.
Part No.:
363 116 Oil Control Valve 60° Rigid 1/4 Turn No-drip Tip
363 114 Oil Control Valve Flex 90° 1/4 Turn No-drip Tip
363 117 Oil Control Valve Formable 1/4 Turn No-drip Tip
363 118 Oil Control Valve Formable 1/4 Turn Narrow No-drip Tip
Market Served:

CV24 Series High Flow Dispense Valve
Samson large delivery control valves are used at the end of the hose assembly to dispense large volumes of lubricants and antifreeze solutions.
Part No.:
363 054 High Flow Control Valve Flexible Semiautomatic 3/4" No-drip Tip
363 055 High Flow Control Valve 60° Rigid Semiautomatic 1" No-drip Tip
363 056 High Flow Control Valve Flexible Semiautomatic 1" No-drip Tip
Market Served:

EC8 Series Digital Dispense Valve
Samson digital control valves are used at the end of the hose assembly for measured dispensing lubricants and antifreeze solutions.
Part No.:
365 536 Oil Control Digital Valve 60° Rigid 1/4" Turn No-drip Tip
365 534 Oil Control Digital Valve Flex 90° 1/4" Turn No-drip Tip
365 537 Oil Control Digital Valve Formable 1/4" Turn No-drip Tip
365 538 Oil Control Digital Valve Formable 1/4" Turn Narrow No-drip Tip
Market Served:

EC19 Series High Flow Digital Dispense Valve
Samson high flow digital control valves are used at the end of the hose assembly for measured dispensing large volumes of lubricants and antifreeze solutions.
Part No.:
365 554 High Flow Control Digital Valve Flexible Semiautomatic 3/4" No-drip Tip
365 657 High Flow Control Digital Valve 30° Rigid Semiautomatic 1" No-drip Tip
365 656 High Flow Control Digital Valve Flexible Semiautomatic 1" No-drip Tip
Market Served:

506 Series Low Pressure
Aluminum base and arms with composite spool hose reel. Reel can handle up to 50′ x 1/2″ hose.
Part No.:
506 121 50' x 3/8" NPTM
506 122 50' x 1/2" NPTM
Market Served:

506 Series Low Pressure DEF
Aluminum base and arms with composite spool hose reel. Reel can handle up to 50′ x 1/2″ hose.
Fluids Handled
Part No.:
506 722 50' x 1/2" BSPPM
Market Served:

506 Series Medium Pressure
Aluminum base and arms with composite spool hose reel. Reel can handle up to 50′ x 1/2″ hose.
Part No.:
506 222 50' x 1/2" NPTM
Market Served:

506 Series High Pressure, Water up to 200°
Aluminum base and arms with composite spool hose reel. Reel can handle up to 50′ x 1/2″ hose.
Fluids Handled
Part No.:
Market Served:

506 Series High Pressure
Aluminum base and arms with composite spool hose reel. Reel can handle up to 50′ x 1/2″ hose.
Fluids Handled
Part No.:
506 321 50' x 3/8" NPTM
Market Served:

506 Series Waste Oil Suction
Aluminum base and arms with composite spool hose reel. Reel can handle up to 50′ x 1/2″ hose.
Fluids Handled
Part No.:
Market Served:

507 Series Low Pressure
Aluminum enclosure with composite spool hose reel. Reel can handle up to 50′ x 1/2″ hose.
Part No.:
507 121 50' x 3/8" NPTM
507 122 50' x 1/2" NPTM
Market Served:

507 Series Low Pressure DEF
Aluminum enclosure with composite spool hose reel. Reel can handle up to 50′ x 1/2″ hose.
Fluids Handled
Part No.:
507 722 50' x 1/2" BSPPM
Market Served:

507 Series Medium Pressure
Aluminum enclosure with composite spool hose reel. Reel can handle up to 50′ x 1/2″ hose.
Fluids Handled
Part No.:
507 222 50' x 1/2" NPTM
Market Served:

507 Series High Pressure
Aluminum enclosure with composite spool hose reel. Reel can handle up to 50′ x 1/2″ hose.
Fluids Handled
Part No.:
507 321 50' x 3/8" NPTM
Market Served:

507 Series High Pressure, Water up to 200°
Aluminum enclosure with composite spool hose reel. Reel can handle up to 50′ x 1/2″ hose.
Fluids Handled
Part No.:
Market Served:

507 Series Waste Oil Suction
Aluminum enclosure with composite spool hose reel. Reel can handle up to 50′ x 1/2″ hose.
Part No.:
Market Served:

504 Series Low Pressure
Full metal heavy duty double pedestal hose reels, can handle up to 50′ x 1/2″ hose.
Part No.:
504 152 50' x 3/8" ID, 1/4" NPTM
504 150 50' x 1/2" NPTM
Market Served:

504 Series Medium Pressure
Full metal heavy duty double pedestal hose reels, can handle up to 50′ x 1/2″ hose.
Fluids Handled
Part No.:
504 250 50' x 1/2" NPTM
Market Served:

504 Series High Pressure
Full metal heavy duty double pedestal hose reels, can handle up to 50′ x 1/2″ hose.
Fluids Handled
Part No.:
504 351 50' x 3/8" NPTM
Market Served:

505 Series Low Pressure
Full metal Heavy-Duty double pedestal hose reels with hose capacity up to 50′ x 3/4″ or 75′ x 1/2″ hose.
Fluids Handled
Part No.:
505 121 50' x 3/4" NPTM
Market Served:

505 Series Low Pressure-Diesel
Full metal heavy duty double pedestal hose reels, can handle up to 50′ x 3/4″ or 75′ x 1/2 hose.
Fluids Handled
Part No.:
Market Served:

505 Series Medium Pressure
Full metal heavy duty double pedestal hose reels, can handle up to 50′ x 3/4″ or 75′ x 1/2 hose.
Fluids Handled
Part No.:
505 221 50' x 3/4" NPTM
Market Served:

505 Series High Pressure
Full metal heavy duty double pedestal hose reels, can handle up to 50′ x 3/4″ or 75′ x 1/2 hose.
Fluids Handled
Part No.:
Market Served:

505 Series Low Pressure-DEF
Full metal heavy duty double pedestal hose reels, can handle up to 50′ x 3/4″ or 75′ x 1/2 hose.
Fluids Handled
Part No.:
Market Served:

508 Series Low Pressure
Full metal heavy duty double pedestal hose reels, can handle up to 50′ x 1″, 60′ and 75′ x 3/4″ or 100′ x 1/2″ hose.
Fluids Handled
Part No.:
508 152 100' x 1/2" NPTM
Market Served:

508 Series Low Pressure-Diesel
Full metal heavy duty double pedestal hose reels, can handle up to 50′ x 1″, 60′ and 75′ x 3/4″ or 100′ x 1/2″ hose.
Fluids Handled
Part No.:
Market Served:

508 Series Medium Pressure
Full metal heavy duty double pedestal hose reels, can handle up to 50′ x 1″, 60′ and 75′ x 3/4″ or 100′ x 1/2″ hose.
Fluids Handled
Part No.:
508 234 65' x 3/4" NPTM
508 224 75' x 3/4" NPTM
508 252 100' x 1/2" NPTM
Market Served:

5085 Series Low Pressure
Full metal heavy duty hose reels, can handle up to 50′ x 1 1/2″ hose.
Fluids Handled
Part No.:
Market Served:

Electric Diaphragm 115 VAC
Electric Diaphragm pumps for use with windshield wash solution, antifreeze solution and DEF
Fluids Handled
Part No.:
Market Served:

Electric Diaphragm 12 VDC
Electric Diaphragm pumps for use with windshield wash solution, antifreeze solution and DEF
Fluids Handled
Part No.:
Market Served:

Electric Diaphragm 24 VDC
Electric Diaphragm pumps for use with windshield wash solution, antifreeze solution and DEF
Fluids Handled
Part No.:
Market Served:

PumpMaster 2 Nickel
Double acting air operated low pressure pumps for transferring lubricants. Pumps include height adjustable 2″ NPTM bung adapter for tank or drum bung mounting. Built in port for optional 609 007 pressure relief valve.
Part No.:
Market Served:

PumpMaster 2 Stainless Steel
Double acting air operated low pressure pumps for transfering lubricants. Pumps include height adjustable 2″ NPTM bung adapter for tank or drum bung mounting. Built in port for optional 609 007 pressure relief valve.
Part No.:
Market Served:

PumpMaster 4 Stainless Steel
Double acting air operated medium pressure high volume pumps for dispensing lubricants in medium size installations. Pumps include height 2″ NPTM adjustable bung adaptor for drum and tank bung mounting. Built in port for optional (PN 609 007) pressure relief valve.
Part No.:
Market Served:

PumpMaster 2 Waste Oil
Double acting air operated low pressure pumps for transfering lubricants. Pumps include height adjustable 2″ NPTM bung adapter for tank or drum bung mounting. Built in port for optional 609 007 pressure relief valve.
Part No.:
Market Served:

2834 UL Listed Aluminum Pump
Conventional air operated diaphragm pumps pump the fluid around the outside of the pump and compressed air acts on the inside face of the diaphragms.
Part No.:
Market Served:

2835 Aluminum Pump
Conventional air operated diaphragm pumps pump the fluid around the outside of the pump and compressed air acts on the inside face of the diaphragms.
Part No.:
Market Served:

2838 Aluminum Pump
Conventional air operated diaphragm pumps pump the fluid around the outside of the pump and compressed air acts on the inside face of the diaphragms.
Part No.:
Market Served:

2840 Aluminum Pump
Conventional air operated diaphragm pumps pump the fluid around the outside of the pump and compressed air acts on the inside face of the diaphragms.
Part No.:
Market Served:

2825 Plastic Pump
Conventional air operated diaphragm pumps pump the fluid around the outside of the pump and compressed air acts on the inside face of the diaphragms.
Fluids Handled
Part No.:
Market Served:

Directflo 30
Directflo diaphragm pumps the fluid through the center of the pump and compressed air acts on the outside face of the diaphragms.
Fluids Handled
Part No.:
553 164A DF30 for DEF
553 124 DF30 Mixing
Market Served:

Directflo 50
Directflo diaphragm pumps the fluid through the center of the pump and compressed air acts on the outside face of the diaphragms.
Part No.:
552 164A DF50 for DEF
552 124 DF50 Mixing
552 010 DF50 Aluminum
Market Served:

Directflo 100
Directflo diaphragm pumps the fluid through the center of the pump and compressed air acts on the outside face of the diaphragms.
Fluids Handled
Part No.:
551 164A DF100 for DEF
551 030 DF100 Aluminum-NBR Check Balls
551 010 DF100 Aluminum-Acetal Check Balls
Market Served:

Directflo 250
Directflo diaphragm pumps the fluid through the center of the pump and compressed air acts on the outside face of the diaphragms.
Part No.:
Market Served:

PumpMaster 60 80:1
Very high pressure and high volume delivery double acting pump for use in applications that require extra pressure and volume output where cold temperaturs or low air pressure could limit pump performance.
Fluids Handled
Part No.:
532 811-400 lb drum pump flange mounted
Market Served:

PumpMaster 4 3:1
Double acting air operated medium pressure high volume pumps for dispensing lubricants in medium size installations. Pumps include height 2″ NPTM adjustable bung adaptor for drum and tank bung mounting. Built in port for optional (PN 609 007) pressure relief valve.
Part No.:
340 520 PumpMaster 4 - 3:1 16 gal (60 l) drum pump
341 120 PumpMaster 4 - 3:1 55 gal (205 l) drum pump
433 PumpMaster 4 - 3:1 270/500 48" Tank
Market Served:

PumpMaster 4 5:1
Double acting air operated medium pressure for dispensing lubricants in medium to large size installations, that include multiple outlets with simultaneous operations. Pumps include height 2″ NPTM adjustable bung adaptor for drum and tank bung mounting. Built in port for optional (PN 609 007) pressure relief valve.
Part No.:
347 520 PumpMaster 4 - 5:1 16 gal (60 l) drum pump
348 120 PumpMaster 4 - 5:1 55 gal (205 l) drum pump
413 PumpMaster 4 - 5:1 270/500 48" Tank, 460 60" Tank
Market Served:

PumpMaster 35 5:1
Double acting air operated medium pressure delivery pump for oil distribution applications. Built in port for optional (PN 609 007) pressure relief valve.
Part No.:
535 581 PumpMaster 35 - 5:1 stub pump
535 511 PumpMaster 35 - 5:1 55 gal (205 l) drum pump
Market Served:

PumpMaster 35 8:1
Double acting air operated medium pressure delivery pump for oil distribution applications. Built in port for optional (PN 609 007) pressure relief valve.
Part No.:
535 881 PumpMaster 35 - 8:1 stub pump
535 811 PumpMaster 35 - 8:1 55 gal (205 l) drum pump
Market Served:

PumpMaster 35 60:1
Heavy Duty double acting pumps that combine high pressure and volume delivery. Recommended for use in distribution and greaseing systems that include pipe lines, hose reels, etc. Pumps include height 2″ NPTM adjustable bung adaptor for tank or drum bung mounting.
Fluids Handled
Part No.:
530 621-120 lb keg pump
530 611-400 lb drum pump
Market Served:

PumpMaster 45 40:1
High Flow double acting pumps with high pressure delivery for use in lubrication systems that require a combination of high flow and pressure delivery. Pumps can be used with grease up to NLGI-2 viscosity.
Fluids Handled
Part No.:
531 411-400 lb drum pump
531 431-Bulk Tote
Market Served:

PumpMaster 45 70:1
High pressure double acting pump for use in applications requiring extra pressure output due to cold temperatures or when low air pressure could limit pump performance. Pumps can be used with grease up to NLGI-2 viscosity.
Fluids Handled
Part No.:
531 711-400 lb drum pump
531 731-Bulk Tote